July 6, 2016 by Hot Rods by Boyd
The HRX3 is part of the new HRX Series from Chris Coddington and Hot Rods by Boyd. Shown here in 20″ with a bronze center and a polished lip. The HRX Series is available in 18,19, and 20″ diameters in a range of widths from 7″ to 15″ wide. The HRX series are designed to fit most 5 lug applications. The profile of the center along with the unique cap specific to this series allows for a deeper look while still getting you the offsets and caliper clearance you need for your vehicle. Like the rest of the HRX Series the HRX3 is 100% made to order and made in the USA. For more information you can contact us at 714-855-4808.
July 6, 2016 by Hot Rods by Boyd
Shown here is the HRX4 which is part of our new HRX Series. The HRX series is the latest line from Chris Coddington and Hot Rods by Boyd. Expanding on the popular HRBB Pro Touring Series the HRX Series has a unique profile and cap that is specific to this series. The HRX series comes in 18,19, and 20″ right now to fit most 5 lug applications. Built with performance and styling in mind the HRX series also accommodates most large brake caliper upgrades. Stay tuned for more information as we launch the HRX series. If you have questions give us a call at 866-612-2693.
July 2, 2016 by Hot Rods by Boyd
Chris Coddington and Hot Rods by Boyd are proud to announce the first of four designs that will make up the new HRX Series. The HRX 1 is shown here in both a polished finish and a brushed and polished combination finish. Our goal at HRBB was to expand our line of Pro Touring and Performance styled wheels. The HRX1 is race inspired and built to handle the most challenging aspects of running a high performance car around the track. Each HRX series wheel is 100% Made to order and made in the USA. The HRX Series will be available in 18,19 and 20″ diameters and in a range of widths up to 15″ wide. Custom widths are also available in this series. The HRX series will also feature a new machined cap that is unique to the series. For more information about the HRX series give us a call at 714-855-4808.
June 12, 2015 by Hot Rods by Boyd
Below is our HR-55 with matte black center and gloss black lip. We then added the .25″ red stripe to the lip. For more info on the HR-55 and Pro Touring Series click the image or give us a call if you have any questions. 714-855-4808
April 14, 2015 by Hot Rods by Boyd
Here is a 19″ HR-01 with our double dark tint paint applied to it. We first polish the centers then brush the tops of the spokes and caps then apply the DDT finish to it before assembling the wheel.
March 17, 2015 by Hot Rods by Boyd
For those running bigger brakes we have taken our Crowbar design and put it into our Pro Touring Profile. The main difference between the two profiles is the Gotcha being the flat profile with .875″ caliper clearance and the Pro Touring being a curved back convex profile with up to 2″ of caliper clearance. The Pro Bar, as we call it, is available in all the same sizes and finishes as the rest of our Pro Touring wheels. If you are trying to decide which series you need to run you can check out our fitment charts here
and look at measurement E on the front measuring guide. Anything less than .875″ and you can run Gotcha. Anything more and you have to run the Pro Touring profile. For more information give us a call at 866-612-2693
October 28, 2014 by Hot Rods by Boyd
Shown 20×12 with 4″ backspace
October 18, 2014 by Hot Rods by Boyd
19×11 HR-01 shown with a Coddington Coatings Cobalt center and brushed outer.
October 3, 2014 by Hot Rods by Boyd
If you are looking for the next level of Pro Touring wheel look no further. The HR-55 takes built to order, strong, design conscious wheel manufacturing to another level. The HR-55 is available for most 5 lug applications with enough brake clearance to accommodate most aftermarket brake packages. We offer a variety of finishes from painted center, polished lip, to brushed and painted. The choices is yours. For more information or to order a set give us a call at 866-612-2693 or email us at Sales