Hot Rods by Boyd
Call us 866-612-2693
January 28, 2013 by Hot Rods by Boyd

Boyd Coddington Built Aerostar Panel Van with SuperCoupe Motor

Picked up a little piece of Hot Rods by Boyd history over the weekend. This 1986 Aerostar panel van was bought by my dad around 1991. It was a bare bones, stick shift delivery van. Like most vehicles that came to the shop it wasn’t long before my dad transformed it. Along with the paint job my dad decided to put a supercoupe supercharged motor under the hood. I had fond memories driving this guy around town when I was right out of high school. The interior is just like the day it was put in, the motor runs really strong, the paint has some issues that we’re going to have to work out. Nice little project for us to get back on the road as our new delivery van.

January 25, 2013 by Hot Rods by Boyd

For Sale -1932 Roadster featuring Boyd Coddington Wheels

This nicely done ’32 Roadster features a Roush Racing built 351 motor with Rousch injection. Steel Rod Bods body, custom chassis with Kugel Komponents front and rear suspension. 17 and 20″ Boyd Coddington New Wave wheels. This roadster was well put together and we love the color combination on it. For more information on this you can contact Ron at 714-336-8526

January 19, 2013 by Hot Rods by Boyd

Rogue – New to the 2013 Signature Series line up

Doing the same ol thing over and over again is only going to get you the same ol results. 2013 is all about heading in a new direction. Nothing is going to take your vehicle in a better direction than our latest directional Signature Series wheel, the Rogue. Available in 17″ -24″ The Rogue is truly a wheel that is not just machined, it’s sculpted. Taking it’s cues from the popularity of directional wheels of the past the Rogue exceeds design and machining boundaries. The Rogue is the result of Chris Coddington’s design work and the latest machining and polishing processes available. For more information about this wheel drop us a line at 866-612-2693.



January 16, 2013 by Hot Rods by Boyd

HR-22 with a killer two tone finish of silver and black

This HR-22 has a two tone finish featuring our Coddington Coatings in Silver and Black. This would be the perfect wheel and finish combination for a high tech sleek looking pro touring set up. We can do any of our wheels in these two tone finishes and in any combination. For more information give us a cal 866-612-2693.

HR-22 in two tone

January 10, 2013 by Hot Rods by Boyd

New Gotcha Series C7S

New for 2013 is the C7S. The C7S is part of our Gotcha Series and is shown here in polished and painted. We have Silver Coddington Coating painted accents in the bolt pattern area and the windows. The C7S is available in 5 lug applications in 17″-24″ diameters.We offer a variety of polished and painted finishes on all our Gotcha Series wheels to match your customization needs.

C7S Gotcha Series


January 7, 2013 by Hot Rods by Boyd

Properly Measuring Backspace and Rim Width

Two very important measurements that need to be taken into consideration when building custom wheels and getting the proper fit for your vehicle are rim width and backspacing or offset. Measuring the rim width is done by measuring bead to bead. This will give you the true width. Measuring edge to edge will not give you an accurate measurement and will cause problems for you when figuring out offset and how big of a wheel you can fit on your vehicle. Keeping that in mind remember that every wheel will measure an extra inch edge to edge(+ or -)so if your figuring out if an 8″ wide wheel will fit on your vehicle you need to be taking into consideration an overall width of 9″.

The next important measurement is backspace. This is the distance from the backside edge of the wheel down to the mounting surface on the wheel. Knowing how to take these measurements properly will help you and Hot Rods by Boyd get the right fitment on your vehicle. Below are pictures of how to take both measurements. Never hesitate to email or call if you have any questions.


January 7, 2013 by Hot Rods by Boyd

Vendetta – New Gotcha Series Wheel for 2013

Chris Coddington and Hot Rods by Boyd are proud to announce one of many new wheels for 2013. This wheel is our latest addition to the Gotcha Series. It’s called the Vendetta. The Vendetta is a true directional wheel that is available in 17-24″ for most 5 and 6 lug applications. Call for pricing and more fitment information 866-612-2693.