New for 2017 | Gotcha Series BOF

The latest and greatest to hit the Gotcha Series this year is the BOF. The BOF is shown here in 22″ in both a brushed top and polished finish and a ceramic charcoal and polished lip. The BOF is a true directional wheel that can be made in both 5 and 6 lug to fit a wide range of fitments. Like the rest of the Gotcha Series we can build the BOF in diameters 17-24″ in a range of widths up to 15″. Every single HRBB Gotcha Series wheel is made to order and made in the USA. If you have some questions about the BOF give us a shout at 714-855-4808.

dsc_2097dsc_2155

Chinook with Brushed and Charcoal Finish

Our 22″ Gotcha Series Chinook shown here with a combination brushed and charcoal finish. 100% machined to order the Chinook starts out as a 6061 rotary forged center that is then machined to your specs. Once machined the Chinook is then polished and paint prepped before masking and applying the brushed and Cerakote Charcoal finish. We can build the Chinooks in a range of fitments and combinations of finishes. If you have some ideas on finishes combinations or have questions about fitments  give us a shout at 714-855-4808.

chinookcharcbrush

 

 

 

 

 

 

The Truth about the 1929 Roadster Dave Kindig Sold at Barrett-Jackson

Last month at Barret-jackson in Scottsdale, Arizona a 1929 Roadster was put up for sale by Dave Kindig  of Kindigit Designs. As per Barrett-Jackson’s website the description for the roadster was as follows:

“Lot #1035 – This 1929 Ford Model A roadster was originally built by Boyd Coddington for a good friend of his, Vern Luce. Vern was one of Boyd’s first clients and had many cars built by Boyd’s Rod Shop. This roadster has many custom touches, such as a custom-built chassis, Boydster independent front and rear suspension, one-off true knock-off wheels, Marcel’s custom body mods including, three-piece aluminum hood and sides, custom floor, shortened rear body, modified body revels, shortened grille, pinched and stretched front end. Finished in Boyd’s Red, the body is excellent. As Boyd was finishing the roadster, Vern passed away. Boyd purchased the car from Vern’s widow. Before the car was complete, Boyd passed away and the car was only in need of a windshield and upholstery. The car is finished to the specifications that Boyd would have finished it. 5-speed manual transmission.”

The car went across the block on Friday evening proudly displayed on the screen as a Boyd Coddington car. Yet another one of Boyd’s projects that didn’t get finished due to his untimely death. The story that was pitched was untrue almost in its entirety. I was made aware of the car the morning of the day the car was supposed to go across the block. A long time employee of my dad called and asked me about it. He was concerned because he was around the time this car would have been started; in fact he would have been there at the end as well. The story being pitched just wasn’t adding up. I made a few calls and could not find anyone that remembered the car or could corroborate Dave Kindig’s story behind the promotion of the car. I attempted to reach out to Dave and the Kindigit camp through social media before the car sold, to no avail. I was flying out to BJ the next day so I was hoping I could track Dave down and get the story from him. On Saturday at BJ right before the French Connection went across the block I ran into Dave, introduced myself, and he immediately said, “Come on let’s go talk about this.” I was pressed for time but had a good 5 minutes to talk it over. Dave told me he bought the car from a guy named Jason Hughes, who had bought the car from Jerry Covington of Covington’s Customs.  It was then that Dave showed me a letter signed by Jerry Covington. It stated clearly all the details of the roadster. Body bought from Boyd Coddington, chassis made by Boyd Coddington, however on the second page it clearly states Covington Customs built the car. Dave told me he had only received that letter just a week before the auction. I asked him why he went through selling the car as one built by my dad and his only response was, “The brochures were already printed.” Our conversation was short since I wanted to see the French Connection go across block, but I was still left with questions about the whole ordeal.

When I got back to town I made a few calls. One was to Jerry Covington. Jerry gave me the run down on the phone just as you see it in the letter. A body was purchased around 1989 from my dad, which was going to be used for a project for Vern Luce before he died. My dad made the chassis and the wheels, and commissioned Thom Taylor to do a rendering of car for Jerry’s wife. From there Jerry took the car and for the next 20+ years worked on it off and on, having people like Marcel’s do work to the body. Jerry sold the car to Jason Hughes in late 2014. In May 2015 Jason contacted Jerry and told him he was trying to sell the car and asked him if he could put together a list about some of the details of the car. This is the list you see here signed by Jerry. In September 2015, as Jerry was fueling up while on the Hot Bike tour, he gets a call from Dave Kindig. Dave tells Jerry he is interested in buying the car and would like some more information. Once again Jerry went down the bullet point list off the top of his head just as he put down on the paper for Jason.
After talking to Jerry I made a call to Dave. I told him about all the information I uncovered and that I wanted him to make it right. I wanted my dad’s name off the car and I wanted the person who actually built the car, Jerry Covington, to receive the proper credit. Not only that but there was a buyer who purchased the car under the pretense it was a Boyd Coddington car. I made it clear I was willing to give him a chance do these things to make it right before I put the information out there. After the first call I received another call from Dave about 4 hours later. It was then that he sent me the Jerry Covington letter. Dave told me a story that he had misunderstood the timeline of the car. Page 2 of that letter clearly states Covington Customs built the car. Dave says he only found out a week before the auction.

Jerry says he talked to Dave in September of 2015. Either way Dave had time to tell the truth, but instead chose to run with another narrative that contradicted Jerry Covington’s letter. My last conversation with Dave was the Tuesday afternoon after BJ. Dave told me he would get back to me by the end of the week and give me a proposal as to how he was going to fix this mess. It’s now almost 3 weeks later and I am still waiting for that call. Dave Kindig has not returned any of my texts or attempts to get hold of him, so I am putting this information out there for the public to decide. In fact Dave has also made an attempt to scrub his social media, specifically his Facebook page of any and all posts or references of the roadster. Take a look at all the information and you will see that this is not a Boyd Coddington-built car.

Time frames can be confused but let’s get to the heart of the matter:
“Boyd purchased the car from Vern’s widow. Before the car was complete, Boyd passed away and the car was only in need of a windshield and upholstery. The car is finished to the specifications that Boyd would have finished it.”

My dad did not purchase this car back and try to finish it before he died. That body and chassiss made a one-way trip to Jerry and he is the one that put together this cool little roadster. This is the part that has myself, The Coddington Estate, Jerry Covington, and everyone upset. As far as Barrett-Jackson is concerned they have in the past required documentation or a letter from the estate to verify a car’s authenticity. In fact the seller of a 1940 Ford convertible project that was in the works by my father when he passed which sold at the same Scottsdale auction was required by Barrett-Jackson to get something in writing from myself or the estate verifying it’s authenticity. I personally verified and supplied the documentation for that car. All it takes is one call or one email to start the process. Looks like they let one slide by.

Chris Coddington
2-17-16

 

IMG_1728 IMG_1730 IMG_2433 IMG_2469 1-Fullscreen capture 222016 73037 PM 1-Fullscreen capture 222016 73041 PM

HRX-4 on Penfound Design Scramjet Camaro

We’ve had the pleasure of working with Barry Penfound of Penfound design on a number of his projects. Last year Barry came to us with his Scramjet concept and wanted us to build a set of one off wheels for it. The result was a full face covered lug wheel we did in a brushed and polished finish. After showing the car a few times with that set of wheels Barry hit us up about changing the look of the car with some of the new HRX-4 series wheels. The decision to go with 19×8 and 19×10 HRX-4’s with a combination charcoal and brushed finish really changed the look and showed off our new wheels rather nicely.

  • Build/Concept:   Penfound Design
  • Owner: Jack Matia
  • Photo: Barry Penfound
  • Car: 1970 Chevrolet ‘Scramjet’ Camaro”
  • HRBB HRX-4 19×8 and 19×10 brushed and charcoal finish

camaro-new-wheels-258-copycamaro-new-wheels-246-copy

Good Guys Columbus 2016 Video

Hot Rods by Boyd and Auto Revolution have put together a video recapping our recent trip to the Good Guys event in Columbus OH. Vinny of Vinny’s Customs brought out the Boydster we have been collaborating on. It was good to have our great friend and designer Eric Brockmeyer on hand to see the progress. As always Good Guys doesn’t disappoint. It’s been a few years since we made the trip back east to the Columbus show but it was well worth it. So many nice cars at this event. It’s also a great time to catch up with people you only see a couple times a year. AZ Pro Performance had all the HRBB wheels on display. Justin Nichols of Nichols Paint and Fab brought out the International Harvester Pickup and it was nice to finally see that with our wheels in person. Thanks to everyone for making this a great trip. Check out the video and enjoy.

 

Chinook Titanium and Polished

Shown here is our Gotcha Series Chinook in 22″ with a combination titanium and polished finish. The Titanium is a ceramic paint and it’s matte finish highlights the detail of the 100% machined in the USA billet aluminum. Like all our Gotcha series wheels the Chinook starts out as a 6061 rotary forging that is heat treated and aged prior to being machined. We manufacture 100% of this wheel in America and we build these to order. The Chinook and the rest of the Gotcha Series is available in 17″ through 24″ diameters in a range of widths to cover most of your custom fitment needs. For more information please call our office located right here in So Cal and we will be happy to speak with you. 714-855-4808.

Chinook Titanium and polished

HRX3 Bronze and Polished

The HRX3 is part of the new HRX Series from Chris Coddington and Hot Rods by Boyd. Shown here in 20″ with a bronze center and a polished lip. The HRX Series is available in 18,19, and 20″ diameters in a range of widths from 7″ to 15″ wide. The HRX series are designed to fit most 5 lug applications. The profile of the center along with the unique cap specific to this series allows for a deeper look while still getting you the offsets and caliper clearance you need for your vehicle. Like the rest of the HRX Series the HRX3 is 100% made to order and made in the USA. For more information you can contact us at 714-855-4808.

HRX Series style number 3

HRX4 Charcoal and Polished

Shown here is the HRX4 which is part of our new HRX Series. The HRX series is the latest line from Chris Coddington and Hot Rods by Boyd. Expanding on the popular HRBB Pro Touring Series the HRX Series has a unique profile and cap that is specific to this series. The HRX series comes in 18,19, and 20″ right now to fit most 5 lug applications. Built with performance and styling in mind the HRX series also accommodates most large brake caliper upgrades. Stay tuned for more information as we launch the HRX series. If you have questions give us a call at 866-612-2693.

 

DSC_0721 DSC_0739